 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| mitsubishi (1/24) AA104SH02_02_00 tentative all information in this techni cal data sheet is tentative and subject to change without notice. 10.4? svga technical specification AA104SH02 mitsubishi electric corp. date: jun.27,?11 free datasheet http:///
mitsubishi (2/24) AA104SH02_02_00 contents no. item page -- cover 1 -- contents 2 1 application 3 2 overview 4 3 absolute maximum ratings 5 4 electrical characteristics 5, 6 5 interface pin connection 7, 8 6 interface timing 9, 10, 11, 12, 13 7 block diagram 14 8 mechanical specification 15, 16 9 optical characteristics 17, 18, 19 10 reliability test condition 20 11 other feature 21 12 handling precautions for tft-lcd module 22, 23, 24 free datasheet http:/// mitsubishi (3/24) AA104SH02_02_00 1. application this specification applies to color tft-lcd module, AA104SH02. these specification papers are the proprietary product of mitsubishi electric corporation (?mitsubishi) and include materials protected under copyright of mitsubishi. no part of this document may be reproduced in any form or by any means without the express written permission of mitsubishi. mitsubishi does not assume any liability for in fringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. no license, express, imp lied or otherwise, is granted under any patents, copyrights or other intellectual property rights of mitsubishi or of others. mitsubishi classifies the usag e of the tft-lcd module as follows. please confirm the usage before using the product. (1) standard usage computers, office equipment, factory auto mation equipment, test and measurement equipment, communications, transportation eq uipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by tft-lcd directly. (2) special usage medical equipment, safety equipment, transpor tation equipment, provided, however, that tft-lcd is necessary to its operation. (3) specific usage cockpit equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. mitsubishi should make a contract that stipulate apportionment of responsibilities between mitsubishi and our customer. the product specified in this document is designed for ?standard usage? unless otherwise specified in this document. if customers intend to use the product for applications other than those specified for ?standard usage?, they should first contact mi tsubishi sales representa tive for it's intended use in writing. mitsubishi has been making co ntinuous effort to improve the reliability of its products. customers should implement sufficient reliability de sign of their application equipments such as redundant system design, fail-safe functions, anti-failure features. mitsubishi assumes no responsibility for any dama ge resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. please contact and consult a mitsubishi sales re presentative for any questions regarding this product. free datasheet http:/// mitsubishi (4/24) AA104SH02_02_00 2. overview AA104SH02 is 10.4? color tft-lcd (thin film tr ansistor liquid crystal display) module composed of lcd panel, driver ics, control circuit, and backlight unit. by applying 6 bit or 8 bit digital data, 800 600, 262k-color or 16.7m-color images are displayed on the 10.4? diagonal screen. input powe r voltage is 3.3 v for lcd driving. the type of data and control signals are digita l and transmitted via lvds interface per typ. 40 mhz clock cycle. driver circuit for led backlight is not included in this module. general specifications are summarized in the following table: item specification display area (mm) 211.2 (h) 158.4 (v) (10.4-inch diagonal) number of dots 800 3 (h) 600 (v) pixel pitch (mm) 0.264 (h) 0.264 (v) color pixel arrangement rgb vertical stripe display mode normally white number of color 262k(6 bit/ color), 16.7m(8 bit/color) luminance (cd/m 2 ) 700 viewing angle (cr 10) ? 80~80(h), ? 60~80(v) surface treatment anti-glare and hard-coating 3h electrical interface lvds viewing direction higher contrast ratio: 6 o'clock less gray scale reversal: 12 o'clock module size (mm) 230.0 (w) 180.2 (h) 10.5 (d) module mass (g) 520 backlight unit led, edge-light, replaceable characteristic value without any note is typical value. free datasheet http:/// mitsubishi (5/24) AA104SH02_02_00 3. absolute maximum ratings item symbol min. max. unit power supply voltage for lcd vcc 0 4.0 v logic input voltage vi ? 0.3 vcc+0.3 v backlight (led) current if 0 180 ma operation temperature (panel) note 1,2) t op(panel) ? 30 80 c operation temperature (ambient) note 2) t op(ambient) ? 30 80 c storage temperature note 2) t stg ? 30 80 c [note] 1) measured at the center of active area and at the center of panel back surface 2) top,tstg 40 c : 90%rh max. without condensation top,tstg > 40 c : absolute humidity shall be less than the value of 90%rh at 40 c without condensation. 4. electrical characteristics (1) tft-lcd ambient temperature: ta = 25c item symbol min. typ. max. unit remarks power supply voltage for lcd vcc 3.0 3.3 3.6 v *1) power supply current for lcd icc -- 315 500 ma *2) permissive input ripple voltage vrp -- -- 100 mvp-p vcc = +3.3 v high vih 0.8 vcc -- vcc v mode, sc logic input voltage low vil 0 -- 0.2 vcc v mode, sc *1) power and signals sequence: 0.1 ms t1 10 ms 200ms t4 0 < t2 50ms 200ms t5 0 < t3 50ms 0 t6 t1 t2 t3 data 0.9vcc 0.9vcc 0.1vcc vcc t4 t5 t6 data: rgb data, dclk, dena, mode, sc 0.1vcc 0.1vcc lcd power supply logic signal backlight power supply free datasheet http:/// mitsubishi (6/24) AA104SH02_02_00 vcc-dip conditions: 1) when 2.6 v vcc < 3.0 v, td 10 ms 2) when vcc < 2.6 v vcc-dip conditions should also follow the power and signals sequence. td 2.6 v 3.0 v vcc *2) vcc = +3.3 v, f h = 37.9 khz, f v = 60 hz, f clk = 40 mhz display image at typical power supply current valu e is 256-gray-bar pattern (8 bit), 600 line mode. *3) fuse parameter fuse type name supplier remark vcc fcc16102ab kamaya electric co., ltd. *) *) the power supply capacity should be desi gned to be more than the fusing current. (2) backlight item symbol min. typ. max. unit remarks -- (27) 33.3 v if = 70 ma, ta = 25c, *2) -- -- 34.5 v if = 70 ma, ta = 0c led voltage vf -- -- 36.0 v if = 70 ma, ta = ? 30c led current if -- 70 80 ma ta = 25c, *1), *3) led life time lt 80,000 100,000 -- h if = 70 ma, ta = 25c *4), *5), continuous operation [note] *1) constant current drive *2) the voltage deviation between strings: |v f1 ? v f2 | 2v *3) led current measurement method c1 a 1 c2 a 2 lcd module a power supply a power supply *4) led life time is defined as the time when the brightness becomes 50% of the initial value. *5) the life time of the backlight depends on th e ambient temperature. the life time will decrease under high temperature. free datasheet http:/// mitsubishi (7/24) AA104SH02_02_00 5. interface pin connection (1) cn 1 (interface signal) used connector: fi-se20p-hfe (jae) corresponding connector: fi-s 20s[for discrete wire] (jae) function (isp 6 bit compatibility mode) pin no. symbol 6 bit input 8 bit input function (isp 8 bit compatibility mode) 1 vcc +3.3 v power supply 2 vcc +3.3 v power supply 3 gnd gnd 4 gnd gnd 5 link 0 ? r0, r1, r2, r3, r4, r5, g0 r2, r3, r4, r5, r6, r7, g2 r0, r1, r2, r3, r4, r5, g0 6 link 0+ r0, r1, r2, r3, r4, r5, g0 r2, r3 , r4, r5, r6, r7, g2 r0, r1, r2, r3, r4, r5, g0 7 gnd gnd 8 link 1 ? g1, g2, g3, g4, g5, b0, b1 g3, g4, g5, g6, g7, b2, b3 g1, g2, g3, g4, g5, b0, b1 9 link 1+ g1, g2, g3, g4, g5, b0, b1 g3, g4, g5, g6, g7, b2, b3 g1, g2, g3, g4, g5, b0, b1 10 gnd gnd 11 link 2 ? b2, b3, b4, b5, dena b4, b5, b6, b7, dena b2, b3, b4, b5, dena 12 link 2+ b2, b3, b4, b5, dena b4, b5 , b6, b7, dena b2 , b3, b4, b5, dena 13 gnd gnd 14 clkin ? clock ? 15 clkin+ clock + 16 gnd gnd 17 link3 ? see: *2) r0, r1, g0, g1, b0, b1 r6, r7, g6, g7, b6, b7 18 link3+ see: *2) r0, r1, g0, g1 , b0, b1 r6, r7, g6, g7, b6, b7 19 mode low=isp 6 bit compatibility mode high=isp 8 bit compatibility mode 20 sc scan direction control. ( low : normal , high : reverse ) *1) metal frame is connected to signal gnd. *2) recommended wiring of pin 17,18 (6 bit input) low data lvds transmitter 6 8 0 6 2 0 v cc p s pin 17 pin 18 pin 17 pin 18 (2) cn 2(backlight) backlight-side connector: sm06b-shls-tf(lf)(sn) (jst) corresponding connector: shlp-06v-s-b (jst) pin no. symbol function 1 nc this pin should be open. 2 nc this pin should be open. 3 led c 1 led cathode 1 4 led a 1 led anode 1 5 led a 2 led anode 2 6 led c 2 led cathode 2 free datasheet http:/// mitsubishi (8/24) AA104SH02_02_00 (3) isp data mapping a. isp 6 bit compatibility mode(6 bit input) clkin+/- link0+/- 1clk link1+/- link2+/- r1 g0 r5 r4 r3 r2 r0 g2 b1 b0 g5 g4 g3 g1 b3 dena b5 b4 b2 clkin+/- link0+/- 1clk link1+/- link2+/- link3+/- r3 g2 r7 r6 r5 r4 r2 g4 b3 b2 g7 g6 g5 g3 b5 dena b7 b6 b4 r1 b1 b0 g1 g0 r0 b. isp 6 bit compatibility mode(8 bit input) clkin+/- link0+/- 1clk link1+/- link2+/- link3+/- r1 g0 r5 r4 r3 r2 r0 g2 b1 b0 g5 g4 g3 g1 b3 dena b5 b4 b2 r7 b7 b6 g7 g6 r6 c. isp 8 bit compatibility mode free datasheet http:/// mitsubishi (9/24) AA104SH02_02_00 6. interface timing lvds transmitter input signal (1) timing specifications item symbol min. typ. max. unit frequency f clk 35 40 42 mhz dclk period t clk 23.8 25 28.6 ns active time t ha 800 800 800 t clk blanking time t hb 20 256 -- t clk frequency f h 35.2 37.9 39.2 khz horizontal period t h 25.5 26.4 28.4 s active time t va 600 600 600 t h blanking time t vb 3 28 -- t h frequency f v 55 60 64.2 hz dena vertical period t v 15.6 16.7 18.2 ms [note] 1) dena (data enable) should always be positive polarity as shown in the timing specification. 2) dclk should appear du ring all invalid period. 3) lvds timing follows the timing specificatio ns of lvds receiver ic: thc63lvdf84b(thine). 4) in case of blanking time fluctuation, please use following. t vbn > t vbn-1 ? 3(t h ) free datasheet http:/// mitsubishi (10/24) AA104SH02_02_00 (2) timing chart a. horizontal timing chart dclk data (r,g,b) dena 1 2 599 600 3 invalid data invalid data t vb line data dena t va b. vertical timing chart 1 2 799 800 3 invalid data invalid data t hb first data last data t h =1/f h t v =1/f v t ha free datasheet http:/// mitsubishi (11/24) AA104SH02_02_00 (3) color data assignment a. 6 bit input input data r data g data b data r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 color msb lsb msb lsb msb lsb black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 basic blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 color cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 green green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 blue blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 [note] 1) definition of gray scale color (n) --- n indicates gray scale level. higher n means brighter level. 2) data 1:high, 0: low free datasheet http:/// mitsubishi (12/24) AA104SH02_02_00 b. 8 bit input input data r data g data b data r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 color msb lsb msb lsb msb lsb black 0 0 0 0 0 00 0 0 000000 0 0 0 0 0 000 0 red(255) 1 1 1 1 1 11 1 0 000000 0 0 0 0 0 000 0 basic green(255) 0 0 0 0 0 00 0 1 111111 1 0 0 0 0 000 0 color blue(255) 0 0 0 0 0 00 0 0 000000 0 1 1 1 1 111 1 cyan 0 0 0 0 0 00 0 1 111111 1 1 1 1 1 111 1 magenta 1 1 1 1 1 11 1 0 000000 0 1 1 1 1 111 1 yellow 1 1 1 1 1 11 1 1 111111 1 0 0 0 0 000 0 white 1 1 1 1 1 11 1 1 111111 1 1 1 1 1 111 1 red(1) 0 0 0 0 0 00 1 0 000000 0 0 0 0 0 000 0 red(2) 0 0 0 0 0 01 0 0 000000 0 0 0 0 0 000 0 red red(255) 1 1 1 1 1 1 1 1 0 000000 0 0 0 0 0 000 0 green(1) 0 0 0 0 0 00 0 0 000000 1 0 0 0 0 000 0 green(2) 0 0 0 0 0 00 0 0 000001 0 0 0 0 0 000 0 green green(255) 0 0 0 0 0 00 0 1 111111 1 0 0 0 0 000 0 blue(1) 0 0 0 0 0 00 0 0 000000 0 0 0 0 0 000 1 blue(2) 0 0 0 0 0 00 0 0 000000 0 0 0 0 0 001 0 blue blue(255) 0 0 0 0 0 00 0 0 000000 0 1 1 1 1 111 1 [note] 1) definition of gray scale color (n) --- n indicates gray scale level. higher n means brighter level. 2) data 1:high, 0: low free datasheet http:/// mitsubishi (13/24) AA104SH02_02_00 (4) display position and scan direction d(x,y) shows the data number of input signal. sc: low sc: high d(1,1) d(800,1) d(1,600) d(800,600) d(800,600) d(1,600) d(800,1) d(1,1) cn2 cn2 free datasheet http:/// mitsubishi (14/24) AA104SH02_02_00 7. block diagram led a1 c1 a2 c2 cn2 s2 timing controller tft-lcd drivers(gate) g1 g2 g600 timing signal display data s1 s2399 s2400 power drivers(source) i/f connector power supply circuit cn1 free datasheet http:/// mitsubishi (15/24) AA104SH02_02_00 8. mechanical specifications (1) front side (unit:mm) free datasheet http:/// mitsubishi (16/24) AA104SH02_02_00 (2) rear side (unit:mm) free datasheet http:/// mitsubishi (17/24) AA104SH02_02_00 9. optical characteristics ta=25c, vcc=3.3v, input signals: typ. values shown in section 6 item symbol condition min typ max unit remarks contrast ratio cr v =0, h =0 450 700 -- -- *1)*2)*5) luminance lw v =0, h =0 560 700 -- cd/m 2 *1)*5) luminance uniformity lw v =0, h =0 -- -- 30 % *1)*3)*5) tr v =0, h =0 -- 4 -- ms *1)*4)*5) response time tf v =0, h =0 -- 12 -- ms *1)*4)*5) horizontal h ? 65 65 ? 80 80 -- *1)*5) viewing angle vertical v cr 10 ? 45 65 ? 60 80 -- *1)*5) image sticking tis 2 h -- -- 2 s *6) red rx 0.528 0.568 0.608 ry 0.306 0.346 0.386 green gx 0.316 0.356 0.396 gy 0.517 0.557 0.597 blue bx 0.119 0.159 0.199 by 0.096 0.136 0.176 white wx 0.273 0.313 0.353 color coordinates wy v =0, h =0 0.289 0.329 0.369 -- *1)*5) [note] these items are measured using ezcontrast (e ldim) for viewing angle and cs2000 (minolta) or equivalent equipment for others under the dark r oom condition (no ambient light) after more than 30 minutes from turning on the backlight unless noted. condition: if = 70 ma measurement method for luminance and color coordinates is as follows. =1 (field) tft-lcd module 500 mm the luminance is measured according to flat panel display measurements standard (vesa standard). free datasheet http:/// mitsubishi (18/24) AA104SH02_02_00 *1) measurement point contrast ratio, luminance, response time, viewing angle, color coordinates: display center luminance uniformity: point 1 5 shown in a figure below 1 2 5 3 4 (1, 1) 150 300 450 200 400 600 (800, 600) *2) definition of contrast ratio cr= luminance with all white pixels / luminance with all black pixels *3) definition of luminance uniformity lw=[lw(max)/lw(min)-1] 100 *4) definition of response time white 90% 90% 10% 10% black tf tr luminance *5) definition of viewing angle ( v , h ) upper(+) lower(-) left (-) right (+) lcd panel v normal axis free datasheet http:/// mitsubishi (19/24) AA104SH02_02_00 *6) image sticking: continuously display the test pattern shown in the figure below for two-hours. then display a completely white screen. the previous image sh all not persist more than two seconds at 25c. black lines white area cols 398-402 rows 298-302 test pattern for image sticking test free datasheet http:/// mitsubishi (20/24) AA104SH02_02_00 10. reliability test condition (1) temperature and humidity item conditions high temperature high humidity operation 40c, 90%rh, 240 h (no condensation) high temperature operation 80c, 240 h low temperature operation ? 30c, 240 h high temperature storage 80c, 240 h low temperature storage ?30c, 240 h thermal shock ?30c (1h) 80c(1h), 100 cycles (2) shock & vibration item conditions shock (non-operation) shock level: 1470m/s 2 (150g) waveform: half sinusoidal wave, 2ms number of shocks: one shock inp ut in each direction of three mutually perpendicular axis for a total of six shock inputs vibration (non-operation) vibration level: 9.8m/s 2 (1.0g) waveform: sinusoidal frequency range: 5 to 500hz frequency sweep rate: 0.5 octave /min duration: one sweep from 5 to 500 hz in each of three mutually perpendicular axis(total 3 hours) (3) esd test item conditions contact discharge (operation) 150pf, 330 , 8kv, 10 times at 1 sec interval signal pin discharge (non-operation) 200pf, 0 , 200v, 10 times at 1 sec interval (4) judgment standard the judgment of the above tests should be made as follow: pass: normal display image, no damage of the display function. (ex. no line defect) partial transformation of the mo dule parts should be ignored. fail: no display image, damage of the display function. (ex. line defect) free datasheet http:/// mitsubishi (21/24) AA104SH02_02_00 11. other feature this lcd module complies with rohs *) directive. *) rohs: restriction of the use of certain hazard ous substances in electrical and electronic equipment ul1950 certified (ul file# e158720) free datasheet http:/// mitsubishi (22/24) AA104SH02_02_00 12. handling precautions for tft-lcd module please pay attention to the followi ngs in handling tft-lcd products; (1) assembly precaution a. please mount the lcd module by using mounting hole with a screw clamping torque less than 0.5 nm. please do not bend or wrench the lcd mo dule in assembling. please do not drop, bend or twist the lcd module in handling. b. please design display housing in a ccordance with the following guide lines. (a) housing case must be designed carefully so as not to put stresses on lcd and not to wrench module. (b) under high temperature environment, pe rformance and life time of led may heavily shorten. when you design with our lcd prod uct, please consider radiating heat and ventilation for good heat management. (c) keep sufficient clearance between lcd mo dule back surface and housing when the lcd module is mounted. approximately 1.0mm of the clearance in the design is recommended taking into account the tolerance of lcd mo dule thickness and mounting structure height on the housing. (d) when some parts, such as, fpc cable and ferrite plate, are inst alled underneath the lcd module, still sufficient clearance is required, such as 0.5mm. this clearance is, especially, to be reconsidered when the additional pa rts are implemented for emi countermeasure. (e) design the led driver location and connector position carefully so as not to give stress to led backlight cable. (f) keep sufficient clearance between lcd module and the others parts, such as inverter and speaker so as not to interfere the lcd modu le. approximately 1.0 mm of the clearance in the design is recommended. (g) to avoid local elevation/decrease of tempera ture, considering location of heating element, heat release, thermal design should be done. c. please do not push or scratch lcd panel surf ace with anything hard. and do not soil lcd panel surface by touching with bare hands. (polarizer f ilm, surface of lcd panel is easy to be flawed.) d. please wipe off lcd panel surf ace with absorbent cotton or soft cl oth in case of it being soiled. e. please wipe off drops of adhesives like saliv a and water on lcd panel surface immediately. they might damage to cause panel surface variation and color change. f. please do not take a lcd mo dule to pieces and reconstruct it. resolving and reconstructing modules may cause them not to work well. g. please do not touch metal fr ames with bare hands and soiled glov es. a color change of the metal frames can happen during a long pr eservation of soiled lcd modules. h. please handle metal frame carefully beca use edge of metal frame is very sharp. free datasheet http:/// mitsubishi (23/24) AA104SH02_02_00 i. please connect the metal frame of lcd module to gnd in order to minimize the effect of external noise and emi. j. be sure to connect the cables and the connecters correctly. (2) operating precautions a. please be sure to turn off the power supply before connecting and disconnecting signal input cable. b. please do not change variable resistance setting s in lcd module. they are adjusted to the most suitable value. if they are changed, it might happen lcd does not satisfy the characteristics specification. c. the interface signal speed is very high. plea se pay attention to transmission line design and other high speed signal precautions to satisfy signal specification. d. condensation might happen on the surface and in side of lcd module in case of sudden change of ambient temperature. please take care so as not to cause any damage mentioned on (1)-d. e. please pay attention not to display the same pattern for very long time. image sticking might happen on lcd. although image sticking may disa ppear as the operation time proceeds, screen saver function is recommended not to cause image sticking. f. please obey the same safe inst ructions as ones being prepared for ordinary electronic products. (3) precautions with electrostatics a. this lcd module use cmos-ic on circuit boar d and tft-lcd panel, and so it is easy to be affected by electrostatics. please be careful with electrostatics by the way of your body connecting to the ground and so on. b. please remove protection film very slowly from the surface of lcd module to prevent from electrostatics occurrence. (4) storage precautions lcd should be stored in the room tempera ture environment with normal humidity. the lcd inventory should be processed by first-in first-out method. (5) safety precautions a. when you waste damaged or unnecessary lcds, it is recommended to crush lcds into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. b. if any liquid leaks out of a damaged glass ce ll and comes in contact with the hands, wash off thoroughly with soap and water. c. be sure to turn off the power supply when in serting or disconnecting the led backlight cable. free datasheet http:/// mitsubishi (24/24) AA104SH02_02_00 d. led driver should be designed carefully to limit or stop its function when over current is detected on the led. (6) others a. a strong incident light into lcd panel may caus e deterioration to polarizer film, color filter, and other materials, which will de grade the quality of display ch aracteristics. please do not expose lcd module under strong ul traviolet rays for a long time. b. please pay attention to a panel side of lc d module not to contact with other materials in preserving it alone. c. for the packaging box handling, please s ee and obey with the packaging specification datasheet. d. please do not reuse the le d unit which is once removed. free datasheet http:/// |
Price & Availability of AA104SH02
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |